Worcester Bosch Combi Boiler Conversion in Leighton Buzzard

Case study · Leighton Buzzard

A combi in the airing cupboard in Leighton Buzzard, with no drain nearby

The customer wanted to replace the existing conventional boiler system and free up space by removing the separate hot-water cylinder and cold-water storage tanks. The new boiler also needed to be relocated into the airing cupboard, where there was no suitable nearby drain for the boiler condensate.

No drain nearby is a common snag when a boiler moves. Here’s how we solved it.

Worcester Bosch 36CDi Compact combi on a plywood backing in an airing cupboard in Leighton Buzzard
The Worcester Bosch 36CDi Compact on its plywood backing

At a glance

LocationLeighton Buzzard
JobCombi boiler conversion
New boilerWorcester Bosch 36CDi Compact
Fitted inThe airing cupboard
RemovedHot-water cylinder and cold-water storage tanks
CondensatePumped up into the loft to a suitable drain
Guarantee10 years parts and labour

What is boiler condensate?

Modern condensing boilers produce a small amount of slightly acidic water, called condensate, as they work. It has to drain away safely. Usually it runs down to a drain by gravity, but when the boiler sits somewhere with no drain below it, a condensate pump can lift it to one.

Before

A conventional system

A separate boiler, hot-water cylinder and cold-water storage tanks.

After

A compact combi

A Worcester Bosch 36CDi Compact in the airing cupboard, with a 10-year parts and labour guarantee.

What we did

Out with the old system

We removed the old boiler, hot-water cylinder and cold-water storage tanks and installed a Worcester Bosch 36CDi Compact combi boiler in the airing cupboard.

A solid backing

The boiler was mounted on a sheet of plywood to provide a solid, neat backing for the installation.

A full system flush

The existing heating system received a full flush to remove debris and help protect the new appliance.

A condensate pump

As a gravity condensate connection was not practical from this location, we fitted a condensate pump, which pumps the condensate up into the loft before discharging into a suitable drain.

Good to know

Moving your boiler? Things to think about

  • The flue needs a safe route outside from the new spot.
  • The condensate needs somewhere to drain. If there’s no drain nearby, a condensate pump can help, as it did here.
  • The boiler needs a solid fixing. On this job a plywood backing gave a strong, neat finish.
  • Leave room around the boiler so it can be serviced easily.

See our boiler installations in Leighton Buzzard.

The result

The property now has a compact, modern combi system providing heating and hot water without the previous cylinder and storage tanks. The new Worcester Bosch boiler is backed by a 10-year manufacturer’s parts and labour guarantee for complete peace of mind.

Frequently asked questions

What is a condensate pump?

A small pump that lifts the boiler’s condensate up to a drain when it can’t run down to one. On this job it pumps up into the loft to a suitable drain.

Why are there water tanks in my loft?

Conventional systems use a cold-water tank in the loft to feed the hot-water cylinder, and often a small tank to top up the heating. A combi works straight from the mains, so the tanks aren’t needed.

How do I keep a 10-year guarantee valid?

Worcester Bosch guarantees need the boiler servicing every year by a Gas Safe registered engineer. Our boiler care plans include your annual service.

Thinking about a new boiler in Leighton Buzzard?

We’re Worcester Bosch Accredited Installers based in Aylesbury, fitting boilers across Leighton Buzzard and the surrounding area. Get in touch and we’ll help you choose the right boiler for your home.

More case studies

See all our case studies, read about our boiler care plans, or see our boiler installations in Leighton Buzzard.

LinkedIn
Facebook
Twitter
Email