Annual Baxi Boiler Service in Leighton Buzzard

Case study · Leighton Buzzard

A Baxi boiler service in Leighton Buzzard, with two expansion vessels

We attended this Leighton Buzzard property to carry out the annual service on the customer’s Baxi heat-only boiler and check that the appliance and heating system were continuing to operate safely and efficiently.

This one had two things worth explaining: a very full magnetic filter, and not one but two expansion vessels.

Baxi heat-only boiler before its annual service in Leighton Buzzard
The customer’s Baxi heat-only boiler

At a glance

LocationLeighton Buzzard
JobAnnual boiler service
BoilerBaxi heat-only
Magnetic filterFull of magnetite, removed and cleaned
Expansion vesselsTwo, both checked
CheckedCondensate trap, gas pressure, gas rate and flue gas

Why two expansion vessels?

An expansion vessel takes up the extra water as the heating warms up. Bigger systems hold more water, so they need more room for it to expand into. On this installation, two are fitted because of the larger system volume.

Before

A filter full of magnetite

A significant amount of debris captured from the heating system.

After

Serviced and running correctly

Filter cleaned, both vessels checked and combustion confirmed.

What we did

Cleaning the magnetic filter

As part of the service, we removed and thoroughly cleaned the magnetic system filter. As the photographs show, the filter had captured a significant amount of magnetite and debris from the heating system. Removing this contamination helps maintain good circulation, protect the boiler and system components, and support efficient operation.

Magnetite caught by a magnetic filter in Leighton Buzzard
Magnetite caught by the filter
Magnetic filter removed for cleaning in Leighton Buzzard
The filter removed for cleaning

Checking both expansion vessels

We also checked the pressure of both expansion vessels, with two fitted on this installation due to the larger system volume.

Gas and combustion checks

The condensate trap was cleaned, the working gas pressure checked and a gas rate carried out to confirm the boiler was consuming the correct amount of gas. Finally, we completed a full flue gas analysis to confirm correct and safe combustion.

Good to know

Keeping your heating system clean

  • Have the magnetic filter cleaned at every service.
  • Keep the inhibitor at the right level to slow down corrosion.
  • Radiators cold at the bottom? Sludge may be building up, and a power flush can clear it.
  • Fix leaks quickly, as constant topping up speeds up corrosion.

Spread the cost with a boiler care plan that includes your annual service.

The result

The boiler was left serviced, tested and operating correctly, with system debris removed from the magnetic filter. Regular servicing provides important safety and combustion checks while also helping identify and remove contamination before it contributes to boiler or heating-system problems.

Frequently asked questions

Do you service Baxi boilers?

Yes. As well as the Worcester Bosch boilers we fit, we service Baxi and Ideal boilers.

Is a full magnetic filter a bad sign?

It shows the filter is doing its job. But a lot of debris means sludge is building up, so it’s worth keeping the filter cleaned and the inhibitor topped up.

How often should a boiler be serviced?

Once a year. That’s what manufacturers recommend, and it’s usually a condition of the guarantee.

Is your boiler due a service?

We service boilers across Leighton Buzzard, Aylesbury and the surrounding area. Spread the cost with a boiler care plan that includes your annual service.

More case studies

See all our case studies, read about our boiler servicing and care plans, or see our boiler installations in Leighton Buzzard.

LinkedIn
Facebook
Twitter
Email