Case study · Amersham
From an old heat-only boiler to a combi in Amersham
The client’s existing boiler was quite old and was a heat-only appliance. They wanted to free up space in the airing cupboard, remove the water storage tanks from the loft and have mains-pressure hot and cold water throughout the property.
Here’s how we converted the system to a new Worcester Bosch combi boiler, and what a conversion like this involves.

At a glance
Heat-only or combi: what’s the difference?
A heat-only boiler (sometimes called a regular boiler) heats your radiators and a hot-water cylinder, usually with cold-water tanks in the loft feeding the system. A combi boiler heats water straight from the mains as you use it, so there’s no cylinder to heat up and no tanks in the loft.
Before
A heat-only boiler with stored hot water
A cylinder taking up the airing cupboard and water storage tanks in the loft.
After
A Worcester Bosch combi boiler
Mains-pressure hot water, with the cylinder and loft tanks no longer needed.
What we did
Converting the system
We converted the system and installed a new Worcester Bosch combi boiler. With the combi heating water straight from the mains, the old cylinder and the loft tanks were no longer needed, which freed up the airing cupboard and the loft.
A thorough MagnaCleanse flush
As part of the installation, we carried out a thorough system flush using MagnaCleanse magnetic filters to remove debris and help protect the new boiler and heating system.
Older heating systems collect sludge and debris over the years. Flushing it out before the new boiler goes on means it starts life with clean water running through it.

Good to know
Is a combi right for your home?
- Combis suit most homes with one or two bathrooms, where showers and taps aren’t usually running at the same time.
- Your hot water comes straight from the mains, so your water pressure and flow matter. We check both when we survey.
- Busier homes with several bathrooms in use at once may be better suited to a system boiler with an unvented cylinder.
- Going combi frees up the airing cupboard and means no more tanks in the loft to worry about in a cold snap.
Not sure which suits you? We’ll look at your home and give you straight advice. See our boiler installations in Amersham.
The result
The customer gained a more modern heating and hot-water setup, freed up valuable storage space and now benefits from mains-pressure hot water without the need for the previous cylinder and loft tanks.
Frequently asked questions
How long does a combi conversion take?
It depends on the house. A conversion takes longer than a straight boiler swap, because the cylinder and tanks come out and the pipework is altered. We’ll give you a clear timescale after the survey.
Will my hot water be stronger with a combi?
For most homes, yes. A combi runs at mains pressure, so showers and taps are usually stronger than from a tank-fed cylinder. How strong depends on the water coming into your home, which is why we check it before recommending a boiler.
Why flush the system when fitting a new boiler?
Sludge and debris in an older system can damage a new boiler and stop radiators heating properly. Cleaning the system is part of fitting a new boiler properly, in line with the manufacturer’s instructions.
Thinking about a combi in Amersham?
We’re Worcester Bosch Accredited Installers based in Aylesbury, fitting boilers across Amersham and the surrounding area. Get in touch and we’ll help you choose the right boiler for your home.
More case studies
Combi conversion in ThameA 15-year-old boiler, cylinder and loft tank replaced with a combi and smart controls.Read the case study →
Worcester Bosch 8000 Life in Aston ClintonAn ageing Main combi replaced with a Greenstar 8000 Life for better hot-water flow.Read the case study →
Boiler replacement in AylesburyAn ageing, leaking boiler replaced with a Worcester Bosch Greenstar 4000 in the loft.Read the case study →
See all our case studies, read about our boiler care plans, or see our boiler installations in Amersham.





