New Radiator Installation in Thame

Case study · Thame

A new landing radiator in Thame, after decorating

We attended a property in Thame after the homeowners had been decorating and wanted to update an older radiator on their landing. The previous radiator had been removed and they wanted a cleaner, more modern replacement.

Here’s how we fitted the new one and got it working properly with the rest of the heating.

New white convector radiator fitted on a landing in Thame
The new white convector radiator on the landing

At a glance

LocationThame
JobRadiator replacement
RoomLanding
New radiatorWhite convector-style radiator
Also includedPipework altered to suit, inhibitor added
Finished withRefilled, bled and balanced

Swapping a radiator: what’s involved?

A new radiator doesn’t always match the old one’s size or where its connections sit. When it doesn’t, the pipework has to be altered so the new radiator sits neatly and connects properly, and the system then needs refilling and setting up again.

Before

An older landing radiator

Already taken off the wall while the landing was decorated.

After

A modern white convector radiator

Pipework altered to suit, with the heating refilled, bled and balanced.

What we did

Fitting the new radiator

We supplied and fitted a new white convector-style radiator, altering the existing heating pipework to suit the new dimensions and connections.

Inhibitor, refill and bleed

We then added heating-system inhibitor, refilled and bled the system and turned the heating back on. Inhibitor helps protect the inside of the radiators and pipework from corrosion and sludge.

Balancing the radiator

Finally, we balanced the radiator so it heats properly alongside the rest of the system. Balancing means setting the valves so every radiator gets its fair share of hot water, rather than the nearest ones taking most of it.

Good to know

Choosing a replacement radiator

  • Measure the old radiator and the distance between its pipes before you choose a new one.
  • Convector radiators have fins on the back, so they give out more heat than a flat panel of the same size.
  • Fit thermostatic radiator valves (TRVs) so you can set each room’s temperature.
  • Thinking of moving a radiator? It can be done with some pipework changes. See how we moved a radiator in Princes Risborough.

Not sure what size you need? Get in touch and we’ll help.

The result

The customer now has a modern replacement radiator that complements the newly decorated space and operates correctly as part of the heating system.

Frequently asked questions

Does the whole system need draining to change a radiator?

Not always. Sometimes just the radiator can be isolated and drained, but if the pipework needs altering the system may need draining down. Either way, it’s refilled, treated with inhibitor and bled afterwards.

What is a convector radiator?

A radiator with metal fins on the back. The fins warm the air passing over them, so it gives out more heat than a flat panel of the same size.

Why does a radiator need balancing?

Without balancing, the radiators nearest the boiler get most of the hot water and the furthest ones stay cooler. Balancing evens it out so every room warms up properly.

Need a radiator fitted or moved?

We carry out heating work across Thame, Aylesbury and the surrounding area, from new radiators to full system upgrades. Get in touch and we’ll take a look.

More case studies

See all our case studies, read about our heating services and plumbing services in Thame, or see our boiler installations in Thame.

LinkedIn
Facebook
Twitter
Email