Annual Boiler Service in Thame

Case study · Thame

An annual boiler service in Thame, step by step

We attended a property in Thame to carry out the boiler’s annual service and ensure the appliance and heating system remained in good working order.

A service is a lot more than a quick look. Here’s what we checked, and why each part matters.

Flue gas analysis during an annual boiler service in Thame
Checking the flue-gas readings

At a glance

LocationThame
JobAnnual boiler service
CleanedMagnetic filter and condensate trap
Expansion vesselRecharged
CheckedGas pressures, gas rate and flue-gas readings
ResultServiced, tested and within the required parameters

Why service your boiler every year?

A yearly service checks the boiler is burning safely, picks up small problems before they turn into breakdowns, and keeps it running efficiently. Most boiler manufacturers also need a yearly service to keep the guarantee valid.

Before

Due its yearly service

Time for the safety checks, a clean of the key parts and a look at the wider heating system.

After

Serviced and tested

Filter and condensate trap cleaned, vessel recharged and the readings within the required parameters.

What we did

Cleaning the filter and condensate trap

As part of the service, we cleaned the magnetic filter, which catches sludge and debris before it can reach the boiler, and cleaned the condensate trap, which can block and stop the boiler working if it’s left.

Recharging the expansion vessel

We recharged the expansion vessel. It takes up the extra water as the system heats up, and if it loses its charge, the boiler pressure can rise and fall more than it should.

Gas and combustion checks

We also checked the gas pressures, gas rate and flue-gas readings, making any necessary adjustments in line with the manufacturer’s instructions. The flue gas analyser shows how cleanly the boiler is burning, which is one of the most important safety checks of any service.

Good to know

Signs your boiler needs a look before its next service

  • The pressure keeps dropping, or climbs a lot when the heating’s on
  • Radiators are cold at the bottom or slow to warm up
  • New noises, such as banging, gurgling or kettling
  • Sooty marks around the boiler or your carbon monoxide alarm going off. Turn the boiler off, open the windows and call the National Gas Emergency Service on 0800 111 999.

Spread the cost with a boiler care plan that includes your annual service.

The result

The boiler was left serviced, tested and operating within the required parameters, helping support safe, efficient and reliable operation.

Frequently asked questions

How often should a boiler be serviced?

Once a year. That’s what most manufacturers recommend, and it’s usually a condition of the guarantee.

What is a magnetic filter?

A filter on the heating pipework, usually near the boiler, that catches magnetite: the black sludge that builds up in heating systems. Cleaning it at each service stops that sludge reaching the boiler.

Is a boiler service the same as a gas safety check?

Not quite. A gas safety check makes sure your gas appliances are safe to use. A service goes further, cleaning and checking the boiler so it keeps running well. Landlords need a gas safety check every year.

Is your boiler due a service?

We service boilers across Thame, Aylesbury and the surrounding area. Spread the cost with a boiler care plan that includes your annual service.

More case studies

See all our case studies, read about our boiler servicing and care plans, or see our boiler installations in Thame.

LinkedIn
Facebook
Twitter
Email