Case study · Aylesbury
A full strip-down service on an Ideal Logic combi in Aylesbury
We attended a property in Aylesbury to carry out a full strip-down service on an Ideal Logic combi boiler, giving the appliance a more thorough internal clean and inspection than a routine annual service.
We service Ideal boilers as well as the Worcester Bosch boilers we fit. Here’s what went into this one.

At a glance
Strip-down or routine service?
A routine annual service covers the safety checks and a clean of the key parts. A strip-down goes further. The fan and burner come out so the heat exchanger can be properly cleaned, and seals can be replaced while everything’s apart.
Before
Due a deeper clean
An Ideal Logic combi ready for a thorough internal clean and inspection.
After
Clean and running safely
New seals, a cleaned heat exchanger and full combustion checks.
What we did
Fan and burner out
The fan and burner were removed to gain access to the heat exchanger, which was thoroughly cleaned using stiff brushes and a mini jet wash.
New seals and a Schrader valve
The burner seals were inspected and replaced, the expansion vessel pressure was checked and topped up, a new Schrader valve was fitted and the condensate trap was cleaned before the boiler was reassembled and fired.
The Schrader valve is the small valve used to check and top up the air pressure in the expansion vessel, much like the valve on a bike tyre.
Combustion checks
We then checked the gas pressure, carried out a gas rate and completed a full flue gas analysis.
Good to know
Looking after your boiler between services
- Keep an eye on the pressure gauge. If it keeps dropping, there may be a leak or a problem with the expansion vessel.
- In freezing weather, check the condensate pipe outside. A frozen one is a common cause of winter breakdowns.
- Bleed radiators that are cold at the top.
- Fit a carbon monoxide alarm near the boiler and test it regularly.
Spread the cost with a boiler care plan that includes your annual service.
The result
The boiler was left clean, correctly reassembled and operating safely in accordance with the manufacturer’s instructions.
Frequently asked questions
Do you service Ideal boilers?
Yes. As well as the Worcester Bosch boilers we fit, we service Ideal and Baxi boilers, like this one and our Baxi service in Leighton Buzzard.
How do I know if my boiler needs a strip-down?
Some boilers need one at a set age or interval, and others when the service checks show it’s needed. We follow the manufacturer’s instructions for your boiler and will tell you if it’s due.
Why top up the expansion vessel?
The expansion vessel needs the right air pressure to take up the extra water as the system heats. If it’s low, the boiler pressure can rise and drop more than it should.
Is your boiler due a service?
We service boilers across Aylesbury and the surrounding area. Spread the cost with a boiler care plan that includes your annual service.
More case studies
Strip-down boiler service in Aston ClintonA five-year strip-down service on a Worcester Bosch 15Ri we fitted.Read the case study →
Strip-down boiler service in Princes RisboroughBurner out and heat exchanger jet washed for a long-standing customer.Read the case study →
Baxi boiler service in Leighton BuzzardA very full magnetic filter cleaned and two expansion vessels checked.Read the case study →
See all our case studies, read about our boiler servicing and care plans, or see our boiler installations in Aylesbury.





