Case study · Haddenham
Gold pillar taps to finish a new kitchen in Haddenham
We were called to a property in Haddenham after the customer had a new kitchen and worktops installed. The new double kitchen sink was in place, but the water pipework underneath had been left capped off.
Here’s how we got the sink working with the taps the customer had chosen.

At a glance
Fitting taps you’ve chosen yourself
Lots of people pick their own taps to match a new kitchen. That’s no problem. We check the taps suit the sink and the pipework underneath, then connect everything so it works properly and doesn’t leak.
Before
Pipework capped off
A new double sink in place, but no taps and no water.
After
A fully working sink
Two sets of gold pillar taps fitted, connected and tested.
What we did
Isolating the water
We isolated the water supply so the pipework under the sink could be worked on safely.
Fitting the taps
The customer had supplied two sets of gold pillar taps for the sink. We fitted the new taps and adjusted the pipework beneath the sink to connect everything correctly.
Testing for leaks
The water was then turned back on and all connections were thoroughly tested for leaks and correct operation.
Good to know
Buying your own taps? A few things to check
- Pillar taps need a hole each, while a mixer tap usually needs one. Make sure the taps match the holes in your sink or worktop.
- Check the taps suit your water pressure. Some are made for low pressure and some for high pressure, and it’s usually in the instructions.
- Keep the fittings and instructions that come in the box.
- Check how to clean the finish. Coloured finishes like gold often need gentle cleaning products.
Need taps fitted or changed? See our plumbing services in Haddenham.
The result
The customer was left with a fully working kitchen sink and a finish that complemented the new kitchen.
Frequently asked questions
Can you fit taps I’ve bought myself?
Yes. On this job the customer supplied two sets of gold pillar taps and we fitted them. We’ll check they suit your sink and water supply first.
What’s the difference between pillar taps and a mixer tap?
Pillar taps are separate hot and cold taps, each in its own hole. A mixer tap blends the hot and cold through one spout.
Why isolate the water before fitting taps?
Turning off the supply means the pipework can be worked on without water escaping. Most sinks have isolation valves underneath. If yours doesn’t, the water is turned off at the stopcock.
Need a plumber in Haddenham?
We carry out plumbing work across Haddenham, Aylesbury and the surrounding area, from taps and sinks to full heating systems. Get in touch and we’ll take a look.
More case studies
Bath and basin taps in Aston ClintonNew taps to finish off a freshly decorated family bathroom.Read the case study →
Annual boiler service in HaddenhamA newer boiler passed its fan pressure test, then got its full set of checks.Read the case study →
Boiler replacement in HaddenhamA 15-year-old boiler with two faults replaced with a Worcester Bosch 18Ri.Read the case study →
See all our case studies, or read about our plumbing services in Haddenham and heating services.





